Shopping Cart:

0 items BUY NOW!

Main / Catalog / Thermal Viewing Devices / Quantum HD19S Thermal Imaging Scope

Our price: $ 3000.00
Larger photo


Magnification: 1.1x/ 2.2x 
Refresh rate: 30 Hz 
Range of detection: 500 m 
Field of view, HxV: 26.8x20.8° 
Operating tamperatures: -25 ... +50 °С

What's in the box

Thermal Imaging Scope Quantum HD19S | Carrying case | User manual | Video cable | Hand strap | Automotive cigarette lighter adapter | Spare battery container | Cleaning cloth | Warranty card 



The Quantum suggests three calibration modes: silent manual mode (“M”), automatic (“A”) and semiautomatic (“H”). The “A” mode implies calibration without user participation (process initiation (actuation of the shutter) takes place automatically). In the “H” mode the user decides on his own if calibration is required based on the image quality. Button “Cal” is pressed in this mode. Manual calibration (“M”) is carried out by pressing the button when the lens cap is closed. The “M” mode is recommended for hunting due to silent operation.       

Operating modes

The Quantum S suggests three operating modes, each designed to deliver best possible image in specific viewing conditions. The modes are as follows: “City” (enhanced contrast), “Forest” (low contrast) and “Identification” (improved rendering of hot objects’ details).     

(Thermal imagers) Quick start-up time

Quick start-up time

The Quantum imaging scopes feature short start-up time (5 - 7 seconds) from the push of a button to full operational status. This is one of the best results in its class.    

Long detection range

High resolution (384x288) microbolometer ensures detailed image and long detection range.   

(Thermal imagers) Body


The body of fiberglass reinforced plastic is able to effectively withstand impact, moisture and dust which allows the units to be used in extreme conditions. The rubber armouring ensures secure grip of the unit. 

Wide range of operating temperatures

Quantum imaging scopes are effective for the use in low temperatures (-25°C) thanks to the frost-resistant OLED display employed in the unit (image remains the same as when viewing at positive environment temperature). 

(Thermal imagers) Brightness and contrast control

Brightness and contrast control

The control wheel located next to the lens allows the user to setup brightness and contrast most appropriate for specific situation.   

(Thermal imagers) Self-contained power supply

Self-contained power supply

The Quantum is powered with four AA size (rechargeable) batteries. The batteries are stored in a container which is then placed in a battery compartment of the unit.      

(Thermal imagers) Video output

Video output

All Quantum models are equipped with an analog video output to enable connection of external recording equipment or transmitting image to the display. 

(Thermal imagers) External power supply

External power supply

Operation time of the unit can be significantly increased thanks to the use of external power supplies (for example, Pulsar EPS3/EPS5) that can be connected with a special jack. When used in frosty weather, the power supply can be stored under the clothes.


Electronic components
Frame Rate, Hz 30
Microbolometer resolution, pixels 384x288
Spectral Sencitivity, µm 7.7 … 13.2
Display type OLED
Display Resolution, pix. 640x480

Optical characteristics
Magnification, х 1.1
Digital zoom, x 2
Objective Lens F19/1.2
Field of View,°, horizontal * vertical 26.8x20.8
Diopter adjustment, dptr. ± 5

Range of Detection, m
Range of detection, m (object (high*width = 1,7*0,5m) 500
Power Supply
Power Supply, V 4 ÷ 6
Battery type 4xAA
Battery Life, hour 5.5
External Power Supply DC 8.4 ÷ 15
Physical & operational characteristics
Level of Protection (acc. to IEC 60529) IPX4
Dimensions, mm 180x86x58
Weight (without batteries), kg 0.32